1650R ????

a DIY, modified Mullard 5-20 monoblock design

1650R ????

Postby IGGY » Sat Dec 22, 2012 8:05 pm

Can I use 1650R in the eiclone instead 1650N? Any stock part need to be change? I plan to use KT120 for new eiclone project.

Regards to all,
Iggy :/
User avatar
IGGY
 
Posts: 81
Joined: Wed Nov 21, 2007 6:22 pm

Re: 1650R ????

Postby battradio » Sat Dec 22, 2012 10:51 pm

Well you will need a lot more bias , Are you going to cathode bias or fix bias ,I would use the Edcor CXPP100-MS-4.2K http://www.edcorusa.com/p/458/cxpp100-ms-4_2k
Mark
Image
User avatar
battradio
KT88
 
Posts: 927
Joined: Tue Mar 10, 2009 12:58 am
Location: near ST.Louis MO.

Re: 1650R ????

Postby IGGY » Sun Dec 23, 2012 8:07 am

Thanks ! [:)

The eiclone will be fixed bias. Thanks ! for information about the transformer.

Regards,
Iggy
User avatar
IGGY
 
Posts: 81
Joined: Wed Nov 21, 2007 6:22 pm

Re: 1650R ????

Postby Shannon Parks » Sun Dec 23, 2012 1:18 pm

I think that will work fine with a KT120, Iggy.

Shannon
User avatar
Shannon Parks
Site Admin
 
Posts: 3764
Joined: Tue Mar 18, 2003 5:40 pm
Location: Poulsbo, Washington

Re: 1650R ????

Postby IGGY » Sun Dec 23, 2012 3:22 pm

;) Thanks ! Shannon,

I received the Ike pcb...thanks again. You said.... you getting around 80 watts with heavily bias KT88 on the stock Ike. I like to try KT120 with 1650R (100 w. opt).
I'm concern about 1650R wring. Can I use the same stock (1650N) wring diagram ? Any parts valve need to be worry about?

Best Regards,
Iggy
User avatar
IGGY
 
Posts: 81
Joined: Wed Nov 21, 2007 6:22 pm


Return to eiclone

Who is online

Users browsing this forum: No registered users and 10 guests