274bx

a DIY, modified Mullard 5-20 monoblock design

274bx

Postby audioray@hotmail.com » Wed Oct 06, 2004 5:59 pm

how should the yellow wires be======conected /unconected
allso the yellow/blackstripe. green/yellowstripe
had mine twisted together===yellow melted.
maybe trans.ruined
i was watching cl90 smoke did not see yellow wires melt.
audioray@hotmail.com
 

Re: 274bx

Postby Shannon Parks » Wed Oct 06, 2004 6:08 pm

audioray@hotmail.com wrote:how should the yellow wires be======conected /unconected
allso the yellow/blackstripe. green/yellowstripe
had mine twisted together===yellow melted.
maybe trans.ruined
i was watching cl90 smoke did not see yellow wires melt.


AudioRay,

These should all be left unconnected. I would clip the ends off of each of them (Hammond has the wire stripped and exposed). You could then wrap electrical tape on them or crimp terminators on them - I got some from Ace.

Shannon
User avatar
Shannon Parks
Site Admin
 
Posts: 3764
Joined: Tue Mar 18, 2003 5:40 pm
Location: Poulsbo, Washington


Return to eiclone

Who is online

Users browsing this forum: No registered users and 9 guests