The "standard" Eiclone power trannies would be 350-0-350 @175 mA, to
400-0-400 @ 20 mA, plus 5V@ 3A and 6.3V @ 6A, for each channel, Hammond 273BX, 274BX or 278X (or the costlier 300 series with the "universal" 100-120/220-240 VAC primary) two Ikes on one chassis would require at least 350-400 mA for the HV, and 4 or 5 amps for the 6.3 VAC filament (presuming that you are not using tube rectification).
Two transformers that are listed on
www.tubesandmore.com are the
Hammond 278CX (378CX) which have 400-0-400 @ 465 mA, and 6.3 VAC at 6A (this may be insufficient filament current), and the One Electron BFT-1B, which can deliver 385-0-385 @ 340 mA, and two 6.3 VAC filament windings, one has 9.5 A, and the second has 4.0A, the 5Vwinding has 4 A
available. THis is a huge and heavy transformer, costs about $130.
My own "best bet" would be to go with two of the power trannies mentioned at the top, as they would cost the same or less than the BFT-1,
or perhaps, the "Toroidal Transformers" mentioned elsewhere in this forum might work. shannon is still the expert on this topic, let's see what he has to say here. :faroah: :notworthy: =D>
/ed B in NH