Eiclone PCB Dimensions?..ATTN: SEPARKS

a DIY, modified Mullard 5-20 monoblock design

ike dims

Postby Shannon Parks » Fri Jan 16, 2004 4:57 pm

Board outline is 6.5" wide by 7.5" deep. I can post the template sometime this weekend.

Shannon
User avatar
Shannon Parks
Site Admin
 
Posts: 3764
Joined: Tue Mar 18, 2003 5:40 pm
Location: Poulsbo, Washington

ike template

Postby Shannon Parks » Fri Jan 16, 2004 5:46 pm

Here's the Eiclone template. Be sure to print at full scale and then double check the dims, which are printed on the drawing, with a ruler.

http://www.diytube.com/templates/ike_template.pdf

Shannon
User avatar
Shannon Parks
Site Admin
 
Posts: 3764
Joined: Tue Mar 18, 2003 5:40 pm
Location: Poulsbo, Washington


Return to eiclone

Who is online

Users browsing this forum: No registered users and 9 guests