diytube.com

Hi all I’m looking on starting a new project, the IKE looks to be a nice one.
Can anyone tell me about the boards, where can I get a set?
I will be using Hammond transformers due to work getting them for me.
There are a few choices on the power transformer the 274BX or the 300BX?
Also for the output what would be better the 1650N or the 1650P?

Greg

Unfortunately, Greg, you'll have to grab a set off of preBay or decide on another project. I sold out of the boards this summer and won't be ordering more. Instead, I have decided on making a universal power supply board eventually to support the ST70 board or Poseidons. Folks could grab the Chong board or the SDS board cheaply, too. The topologies are the same, except for the fact that the drivers don't support the 6SN7 or 6SL7. That is kind of sad, but it wouldn't take much effort to hardwire octals to the red drivers and use 1" standoffs (this is what I tell Thermion). But there's also Pete Millett's board for those octal lovers. There's also the possibility of building a new pair of MKIIIs.

Thanks again for your help.

Greg