Page 1 of 1

Volume Pot Chubby Clementine

PostPosted: Mon Mar 09, 2015 3:48 pm
by patrick1962
I have a 100K dual volume pot and I want to be sure that I am connecting it correctly. One side of each channel on the pot goes to the positive RCA inputs, middle lugs go to J1/J2 first pin and last two lugs on the pot go to J1/J2 pin two to ground?

Thanks.

Re: Volume Pot Chubby Clementine

PostPosted: Mon Mar 16, 2015 10:41 am
by TomMcNally
You can see it in the upper right corner of this pic ...

Left = ground
Center = Output
Right = Input

Image

Re: Volume Pot Chubby Clementine

PostPosted: Fri Mar 20, 2015 12:18 pm
by patrick1962
Tom:

Thanks as I looked through the Park Audio site and downloaded this photo to figure out the wiring of the volume pot.

Patrick