Page 1 of 1

Chubby Clementine with 6n3c-E's

PostPosted: Mon May 26, 2014 12:25 pm
by TomMcNally
I put this together Saturday. The usual Hammond 12x8x3, Edcor XPWR-005 and GXSE15-8-5K Outputs and Triad C24X Choke.
I also used an Alps pot with the PC board. Sounds sweet like all Clementines. (lol)

Image
Image
Image
Image

Re: Chubby Clementine with 6n3c-E's

PostPosted: Mon Jan 26, 2015 10:56 pm
by opa1
Hey Tom, You build some nice amps! I have a question on the board mounted to the alps pot. Did you make it or can I buy them somewhere?

Re: Chubby Clementine with 6n3c-E's

PostPosted: Tue Jan 27, 2015 6:46 pm
by Shannon Parks
TT, Tom probably used something like this:
http://www.ebay.com/itm/1pc-ALPS-100K-A ... 5d406ac543

Basically it's a header PCB board using Euro connectors. Just makes hookup a lot simpler than soldering on the pins.

Shannon

Re: Chubby Clementine with 6n3c-E's

PostPosted: Tue Jan 27, 2015 7:05 pm
by opa1
Thanks, That makes the job a lot easier. :)

Re: Chubby Clementine with 6n3c-E's

PostPosted: Wed Jan 28, 2015 8:39 pm
by Ludwig
Hi Tom - do you drill and punch those Hammond chassis yourself, or are they pre-fabricated with the templates you've supplied to Hammond?