Chubby Clementine with 6n3c-E's

sweet & juicy SE amp for 1626 Darlings and the 6L6 family

Chubby Clementine with 6n3c-E's

Postby TomMcNally » Mon May 26, 2014 12:25 pm

I put this together Saturday. The usual Hammond 12x8x3, Edcor XPWR-005 and GXSE15-8-5K Outputs and Triad C24X Choke.
I also used an Alps pot with the PC board. Sounds sweet like all Clementines. (lol)

Image
Image
Image
Image
User avatar
TomMcNally
Darling du Jour
 
Posts: 2698
Joined: Sat Nov 19, 2005 2:19 pm
Location: Northfield, NJ

Re: Chubby Clementine with 6n3c-E's

Postby opa1 » Mon Jan 26, 2015 10:56 pm

Hey Tom, You build some nice amps! I have a question on the board mounted to the alps pot. Did you make it or can I buy them somewhere?
Tenacious Tuber
User avatar
opa1
 
Posts: 35
Joined: Mon Jan 05, 2015 11:05 pm
Location: Texas

Re: Chubby Clementine with 6n3c-E's

Postby Shannon Parks » Tue Jan 27, 2015 6:46 pm

TT, Tom probably used something like this:
http://www.ebay.com/itm/1pc-ALPS-100K-A ... 5d406ac543

Basically it's a header PCB board using Euro connectors. Just makes hookup a lot simpler than soldering on the pins.

Shannon
User avatar
Shannon Parks
Site Admin
 
Posts: 3759
Joined: Tue Mar 18, 2003 5:40 pm
Location: Poulsbo, Washington

Re: Chubby Clementine with 6n3c-E's

Postby opa1 » Tue Jan 27, 2015 7:05 pm

Thanks, That makes the job a lot easier. :)
Tenacious Tuber
User avatar
opa1
 
Posts: 35
Joined: Mon Jan 05, 2015 11:05 pm
Location: Texas

Re: Chubby Clementine with 6n3c-E's

Postby Ludwig » Wed Jan 28, 2015 8:39 pm

Hi Tom - do you drill and punch those Hammond chassis yourself, or are they pre-fabricated with the templates you've supplied to Hammond?
Ludwig
 
Posts: 37
Joined: Tue Jan 27, 2015 8:01 pm


Return to clementine

Who is online

Users browsing this forum: Bing [Bot] and 1 guest