Pentode operation?
Posted:
Mon Nov 14, 2011 3:40 pmby apurcell22
Is it possible to set up the Clemintine up for pentode operation? How would it be done? One more question, what pins from the octal socket do you wire to a 5 pin socket for the 807?
Thanks,
Al
Posted:
Mon Dec 12, 2011 10:15 pmby Thermion
Al,
The clementine board is set up for a 6L6 tube so pins 2 and 7 are filaments, pin 5 is the grid, pin 4 is the screen, pin 3 is the plate, and pin 8 is the cathode.
On your 807 tube, pins 1 and 5 are the filaments, pin 3 is the grid, pin 2 is the screen, and pin 4 is the cathode. The plate is the connector at the top of the tube.
Hope this helps.
JT
Posted:
Mon Dec 12, 2011 11:27 pmby apurcell22
Thanks for the response.
Al