Pentode operation?

sweet & juicy SE amp for 1626 Darlings and the 6L6 family

Pentode operation?

Postby apurcell22 » Mon Nov 14, 2011 3:40 pm

Is it possible to set up the Clemintine up for pentode operation? How would it be done? One more question, what pins from the octal socket do you wire to a 5 pin socket for the 807?
Thanks,
Al
apurcell22
 
Posts: 57
Joined: Mon Apr 12, 2010 7:17 pm

Postby Thermion » Mon Dec 12, 2011 10:15 pm

Al,

The clementine board is set up for a 6L6 tube so pins 2 and 7 are filaments, pin 5 is the grid, pin 4 is the screen, pin 3 is the plate, and pin 8 is the cathode.

On your 807 tube, pins 1 and 5 are the filaments, pin 3 is the grid, pin 2 is the screen, and pin 4 is the cathode. The plate is the connector at the top of the tube.

Hope this helps.

JT
Thermion
 
Posts: 181
Joined: Mon Jul 07, 2003 6:04 pm
Location: Fisher, IL

Postby apurcell22 » Mon Dec 12, 2011 11:27 pm

Thanks for the response.
Al
apurcell22
 
Posts: 57
Joined: Mon Apr 12, 2010 7:17 pm


Return to clementine

Who is online

Users browsing this forum: No registered users and 17 guests