Clementine board

sweet & juicy SE amp for 1626 Darlings and the 6L6 family

Clementine board

Postby Trix812 » Wed May 10, 2017 2:03 am

Hi

I'm pretty new to this and I'm currently gathering stuff to make the darling.
I have tubes and a made a wooden cabinet and speaker cabs but now it seems there are no more boards to be had.
What are the alternatives?
Trix812
 
Posts: 3
Joined: Sun Jul 31, 2016 5:58 am

Re: Clementine board

Postby Geek » Wed May 10, 2017 5:33 am

Nothing beats good ol' point-to-point ;)
-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
User avatar
Geek
KT88
 
Posts: 3535
Joined: Sun Oct 21, 2007 3:01 am
Location: Chilliwack, British Columbia

Re: Clementine board

Postby TomMcNally » Thu May 11, 2017 2:01 pm

The hardest part of building an amp for most people is doing the metalwork, cutting the holes in the chassis and mounting the tube sockets, transformers, I/O jacks, power jack, etc. Once you do that, point to point wiring isn't very hard. Granted, I was spoiled in building Darlings, with the circuit board, but have build many point to point, I think I've build close to 50 total. You can use the Darling/Clementine schematic, which is pretty much identical to my amps with 12SL7's over the years.

Take a look at http://tmamps.com and click to zoom in. Very rare that there are two identical, unless they were intended to be "twins" !

You can use simple old fashioned "tag strips" or pre-made turret strips, but don't try to recreate a circuit board, just use the shortest route.

Hope the pics help.

... tom
User avatar
TomMcNally
Darling du Jour
 
Posts: 2698
Joined: Sat Nov 19, 2005 2:19 pm
Location: Northfield, NJ

Re: Clementine board

Postby Trix812 » Thu May 11, 2017 8:17 pm

Thanks Geek and Tom
Trix812
 
Posts: 3
Joined: Sun Jul 31, 2016 5:58 am


Return to clementine

Who is online

Users browsing this forum: No registered users and 1 guest