Rega Turntables

analog music reproduction discussion

Rega Turntables

Postby SDS-PAGE » Tue May 06, 2008 5:10 pm

Anybody here owns a Rega? How do you like 'em? I see there are several Planar models. I am looking at the P3. I like how simple it looks with no frills. Thanks!
User avatar
SDS-PAGE
KT88
 
Posts: 865
Joined: Thu Feb 22, 2007 4:41 pm
Location: Brandon, SD

Postby wiredbecker » Tue May 06, 2008 6:10 pm

I have the Rega Planar 2 with the stock Lustre branded RB250 or is it 200? Anyway, it is a fine turntable. Love the glass platter. I am looking to sell my Planar 2 and pick up the 3 with the RB300 arm. I like the weight and shape of the arm a lot. If I had a crapload more money to drop, I'd probably get a VPI Scout or Scoutmaster.
User avatar
wiredbecker
KT88
 
Posts: 301
Joined: Mon Mar 26, 2007 3:48 pm
Location: Albany Landfill, CA

Postby Pyre » Wed May 07, 2008 7:34 am

I have had a couple of 2's and currently have a 3. The 3 is a great table with lots of arm options.

The early 2's came with the R200 arm and the later models came with the RB250. The R200's had a problem with the anti skate breaking. I really liked the RB250, very easy to set up.

I currently have a Mayware formula IV on my Planer 3 and its a pain to set up I wish I still had the RB300.

Unless someone drops a Micro Seiki on my door step I will stick with Regas.
Pyre
 
Posts: 66
Joined: Wed Jun 07, 2006 11:13 am
Location: Burlington, ON

Postby DerekVa » Tue May 20, 2008 4:16 pm

I have a Planar 3. It is currently running an R200 arm with a Denon DL-110, but it has had an RB300 on it in the past (I stole that arm and put it on my Nottingham Analogue Interspace with the intention of getting a DL-102 mono cartridge). If you get an older Planar 3 / P3, make sure it has the motor upgrade. The glass platter is a bit 'ringy' but not too bad. It is one of the better budget turntables out there.

There is a lot you can do with the RB250 / RB300 arm (a better bang for the buck than the P3, IMHO) to make it a great little performer. One thing to make sure of - avoid the Rega carts - they suck. A Denon DL-103R is a great match for the RB250/RB300.

-D
DerekVa
 
Posts: 225
Joined: Sat Jun 10, 2006 12:43 am
Location: Woodinville, WA

Postby craigtone » Sat Jun 21, 2008 6:39 am

I have a Rega P2 with 250 arm and a Denon DL-103 cartridge. I like the sound of the Rega but in my system the glass platter is a bit bright. I have a modified ST-70 and Klipsch RF-7's. I considered upgrading the Rega, but think I'll switch to a VPI Scout for the same money as the Rega mods.

BUT ... all this being said, I think Rega make s a GREAT out-of-the-box starter table ... AFTER you ditch their junk MM cartridges! I had a hard time with tracking force. Stock was too light and every record sounded dirty. If I went any higher, the sound distorted. NOT a fan of Rega cartridges!

BTW, Rega tables have a unique sound that sets them apart from others. The secret ... they run a tad faster than 33-1/3.
http://www.craigtone.com
<b>P2, DL-103R, AU-300, FT-101, C521BEE, Seduction, ForePlay, ST-70, RF-7's</b>
User avatar
craigtone
 
Posts: 109
Joined: Thu Feb 16, 2006 2:46 pm
Location: Holland, MI

Postby SDS-PAGE » Sat Jun 21, 2008 2:59 pm

Unless someone drops a Micro Seiki on my door step I will stick with Regas


Are there any particular models of Micro Seiki that are expensive? Ones that I can find are pretty cheap.
User avatar
SDS-PAGE
KT88
 
Posts: 865
Joined: Thu Feb 22, 2007 4:41 pm
Location: Brandon, SD


Return to plastic fantastic lovers

Who is online

Users browsing this forum: No registered users and 1 guest

cron