by erichayes » Fri Sep 28, 2007 12:48 am
Rule number one in DIY: Try it.
Rule number two: If it doesn't work, sonically or electrically, try it again from another approach.
Rule number three: Discuss your results with the brethren.
Works just about 100% of the time.
Bear in mind that a phono preamp is one of the most difficult projects a DIYer can undertake. You're fighting hum, noise and equalization gremlins; if you haven't built a project from scratch, I'd strongly recommend that you get some simpler projects under your belt before you attack a PPre.
If, on the other hand, you have some experience with home brew circuitry construction, have at it--and let the rest of us be your support group.
Eric in the Jefferson State