diytube.com

Posted: **Fri Jun 12, 2009 6:58 pm**

Ty,
I think Phil just posted the pictures of Iamnoman's speakers which failed to show in his post. Vince

Posted: **Fri Jun 12, 2009 7:45 pm**

Ah yes, I see. Well, they're still very nice looking speakers.

Posted: **Sat Jun 13, 2009 3:14 am**

right! This was my intention!

Posted: **Mon Dec 21, 2009 1:36 pm**

Here are my JBL 4530 bass cabs with 350hz Edgarhorns and Heil tweeters. Tri amped through a Behringer CX3400

Posted: **Sun Jan 17, 2010 10:47 pm**

commonsenseaudio.com Nirvana Super 8's..... 1.3 cabinets

This is a smaller cabinet, sounds clean, beautiful mids, but not a lot of bass. They have many other enclosure designs to choose from when you buy their drivers. I wish I could afford some 12's. I bet they sound nice.

These need a little bass. I will supplement.

Posted: **Fri Feb 26, 2010 5:44 am**

After a long hiatus, i finally got to order some Audio Nirvana 8" cast Supers. We'll see how they improve the fidelity of my speakers.

The cabinets have held up well, however.

hembrook wrote: I am thinking of getting some of the 8" Pioneers folks love as well as some Fostexs. I'll let you know how it goes.

Posted: **Thu Mar 18, 2010 2:39 pm**

Here's some baltic birch front-loaded horns I have in the works. You can also see a 3-way EV Aristocrat that I built a few years ago out of baltic birch, solid wenge, and wenge veneer.

http://diyfirefly.blogspot.com

Ben

Posted: **Sun May 16, 2010 12:44 am**

Here's my newly finished hONKEN (fONKEN with HiVi drivers).
Sounds pretty good but maybe a bit distracted and limited but as PC-speakers they are perfect.

Posted: **Sun May 16, 2010 12:54 am**

Awesome, Magnus! :-)

Gonna oil them up, or stain?

Cheers!

Posted: **Mon May 24, 2010 10:32 am**

Here's my JBL 4530 replicas, loaded with PD154.

Posted: **Tue Jan 17, 2012 11:10 am**

Cast Frame 8-inch Audio Nirvanna drivers in Modified DIY Decware Cabinet. Cabinet originally done by local cabinet maker and re-sized for 6 inch decware Fostex. Fostex motors and passive radiators were damaged during building. I re-buit passives and replaced Fostex drivers with AN's. Driving with 5-watt SET spud on loan from Kegger from that other site. Combined with Velodyne SPL 1000 they sound very good with NO equalization and no evidence of harshness or shout. Happy accidents do happen. Still need some clean-up work.

https://sites.google.com/site/michaelspoetrypage/pic

Posted: **Wed Apr 11, 2012 11:07 am**

My handsome red Frugel Horns (built from the Planet 10 flat pack)

Here's the full write-up of the build: http://www.diyaudioblog.com/2011/10/pla ... oaded.html

Posted: **Wed Apr 11, 2012 5:05 pm**

highflyin9 wrote:My handsome red Frugel Horns (built from the Planet 10 flat pack)

Looking good!

Did Dave see how you finished them, or did they come that way?

Posted: **Sat Apr 14, 2012 11:18 pm**

He did see them, I threw up a few photos in the DIYAudio Planet10 section. It was actually pretty tricky dying such a large surface area with water-based stain, you have to dry it off quickly before it streaks. Since it was my first time using it, I probably didn't do the greatest job, but I like the way it came out.

Posted: **Sat Apr 14, 2012 11:27 pm**

highflyin9 wrote:It was actually pretty tricky dying such a large surface area with water-based stain, you have to dry it off quickly before it streaks.

Yeah, water based stains on that large a thing (and really thirsty Baltic birch), I'd bring out the sprayer for

Again, super job!

Cheers!

diytube.com

Show me your DIY Speakers !

commonsenseaudio.com Nirvana Super 8's..... 1.3 cabinets

Re: So Far, they sound like PA speakers

DIY Front-loaded horns and EV Aristocrats

Audio Nirvanna in Modified DIY Decware cabinet