Hand Wired get*set*go clone

2nd harmonics for the masses

Hand Wired get*set*go clone

Postby TomMcNally » Thu Nov 16, 2017 4:59 pm

With the unfortunate demise of the get*set*go boards, I decided to build one by hand. It wasn't difficult, using some turret boards from http://apexjr.com I used 5 boards, one for the high voltage supply, left and right filament supply, and left and right cathode resistors and caps. Not a bad look. Fired right up and sounds great.

Image
Image
Image
Image
User avatar
TomMcNally
Darling du Jour
 
Posts: 2729
Joined: Sat Nov 19, 2005 2:19 pm
Location: Northfield, NJ

Re: Hand Wired get*set*go clone

Postby Geek » Thu Nov 16, 2017 8:39 pm

Tradition at its finest :))

Great work! Clean layout (y)
-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
User avatar
Geek
KT88
 
Posts: 3585
Joined: Sun Oct 21, 2007 3:01 am
Location: Chilliwack, British Columbia

Re: Hand Wired get*set*go clone

Postby Quad » Fri Nov 17, 2017 12:30 am

So neat....I wish I had your build as a reference when I built mine with Transcendar OPTs and
Antec Toroidal Power Tranny, on ST70 chassis back in 2009...mine looks so bad now :)

dscf0013.jpg
dscf0013.jpg (656.32 KiB) Viewed 6279 times
Attachments
dscf0020.jpg
dscf0020.jpg (592.32 KiB) Viewed 6279 times
Quad
KT88
 
Posts: 253
Joined: Mon Jan 14, 2008 6:54 am
Location: India

Re: Hand Wired get*set*go clone

Postby TomMcNally » Sun Nov 19, 2017 8:16 pm

Gregg - You can't beat those turret boards for $ 1.99, old, but well made from apexjr.com. I sat and stared for awhile until I figured out the best way to make it happen.
Quad - You didn't have a lot of space to work with under that ST-70 chassis. I really like the Hammond 8x12x3" chassis. My technique it to use a 4/40 threaded spacer on the tube socket mounting bolt and building a sub-assembly there.

... tom
User avatar
TomMcNally
Darling du Jour
 
Posts: 2729
Joined: Sat Nov 19, 2005 2:19 pm
Location: Northfield, NJ


Return to get*set*go

Who is online

Users browsing this forum: No registered users and 10 guests