diytube.com

Hi,

I'm in the process of collecting the parts for my Get Set Go build. A while back, I purchased these sockets from tube depot:

https://tubedepot.com/products/belton-8 ... t-5mm-pins

It works, but it took a lot of bending to get it to fit into the pcb. I wondered if anyone had a suggestion for a socket that fit the board better.

Thanks,
Brad

Hi,

Not all tube sockets are equal in that way.

It was designed for this style:
https://tubedepot.com/products/8-pin-pc-mount-socket

Cheers!