Page 1 of 1

James/6AV5GA get*set*go

PostPosted: Sat Apr 16, 2016 12:43 pm
by TomMcNally
I built this get*set*go this morning, used a Dynakit Parts PA-774, James JS-6113HS outputs, 3.5K / 8 ohm taps, and a Dynakit Parts C-354 choke. Everything else is the standard Mouser BOM list. I wired it up for the almost free 6AV5GA tubes, using Ed Brown's mod. Used a Black Hammond 12x10x2 chassis.

Image
Image
Image

More amp pics at http://tmamps.com

Re: James/6AV5GA get*set*go

PostPosted: Tue Apr 19, 2016 5:13 pm
by kmolles
Dang it Tom! Now I'm convincing myself I need one of these! :) Good job!

Re: James/6AV5GA get*set*go

PostPosted: Tue Apr 19, 2016 7:05 pm
by TomMcNally
I just finished another one tonight. I made a deal with a friend for a couple of extra chassis he had. Burning it in now ! :))

... tom