Voltage regulators
Posted: Sat Jan 16, 2016 3:35 am
Hi all.
I'm not sure if this was a good idea, but I had way to much plate voltage for a pair of 45 so I put two series OD3 between the power supply side of R7 and ground. I used an ~7k resistor between R7 and the first VR to establish the current for the regulator tubes. Everything SEEMS to work fine. Does anybody see any problem with doing this?
Thanks!
I'm not sure if this was a good idea, but I had way to much plate voltage for a pair of 45 so I put two series OD3 between the power supply side of R7 and ground. I used an ~7k resistor between R7 and the first VR to establish the current for the regulator tubes. Everything SEEMS to work fine. Does anybody see any problem with doing this?
Thanks!