by jetpack » Fri Jul 27, 2012 4:07 pm
Thanks for the suggestions. I want to switch 3 or 4 sources, so I went with a locally-sourced (New Zealand) switch. I am fine with everything running through the volume control, so I don't need an elegant solution like SVinzant.
I did decide to cancel the ESE125 order and go with something a little nicer. I'll most likely use a pair of SILK output transformers now. My original plan was to put in the budget Hammonds and then pick up some Japanese iron on a visit to Japan in early 2013, but that's a long time to wait...
I have access to a metal break at my workplace, so I'll give a go at making my own chassis. I have very limited experience with metal work, so it will probably end up looking like a stock trailer. I'll post some photos if there is anything worth seeing.