I decided to use the templates laid out by more exp builders, pairing the Getset with 300b output tubes.
Im waiting for the PCB and parts, but the transformers have made it in and are mounted.
Transformer compliament includes:
2 CXSE25-8-5K output transformers (10 lbs each)
Wattage 25W
Max. Current 200mA
Primary (input) Impedance 5K Ohms
Primary (input) DCR 85 Ohms
Primary (input) Inductance 50H
Screen/Grid Tap 40%
Secondary (output) Impedance 8 Ohms
Secondary (output) DCR <1 Ohm
Frequency Response 20~20K Hz., <1dBu
1 XPWR005-120 Power Transformer
Power transformer for 660V (330-0-330) at 180mA center tapped and two 6.3V at 2.5A.
2 C354 cokes. 55 ohms, 1.5 henries, 10% tolerance, 2500 volt DC hipot tested, 200 ma DC.
I can’t afford tubes yet, but should be something to behold when done.
Shannon was kind and found the 5watt 1.5ohm resistors I needed. I bought 4 for $2 and paid $8 for shipping. Ouch!
The sockets are antique electronic supply $25 each... no idea why so much, but will allow for under mount and a clean look up top.