lying around.
Since I already made a PP amp, I wanted to try a SET.
I considered a few choices, and finally decided to try the
GSG in a point to point mode, my first attempt at PTP.
Shannon, I used the GSG circuit for this without
prior permission. Hope it is OK. Let me know.
Compliments on the design - it is clean, simple and
sounds great. It really lives up to it's name.
I used pieces of Bakelite sheet as a back plane.
The config - Transcendar 3K OPTs, Sovtek 6B4Gs, NOS
RCA 6AX5GT and a NOS Raytheon 6SL7. The PT is an
Antek AN-1T300.
The large coupling caps are made in India by El-Ci-Ar
and highly regarded by enthusiasts here, one of whom
gave me this pair. I made an extension shaft for the
pushbutton type power switch. The transformer leads are
not trimmed yet, so there are some long, coiled wires in
the pic. I wanted a removable power cord, so used one of
those 3 pin CB radio style connectors - had to drill out
the hole a little bit to fit this.
Prasad
[/img]
