by hembrook » Mon Jan 28, 2008 6:16 am
I am using mostly European stuff, as I live in Europe, so for instance, positive wall current over here is blue, negavtive is brown adn the ground wire is green. Therefore I wired the power switch with blue wire. I wired the standby switch with yellow/green striped wire.
However, my transformers have blue for the signal (plate) end and red for the B+ (power) end. I ended up using green wire to connect the PCB to the grid, and black wire for the DC heaters.
I used 4-condictor microphone cable to wire the inputs, so I have red/black and white/green as the Right hot/ground and left hot/ground respectively.
I was up kinda late doing that. It might not make any sense. I dunno if that helped or not.