GSG decal
Posted: Mon Jan 07, 2008 12:42 pmShannon, I am getting ready to do some decals for my amp. I have this but would like to have a border around diytube like on the st amp. Hoping you have something like this on file you can post. Thanks
Page 1 of 1
Posted: Mon Jan 07, 2008 12:42 pmPosted: Mon Jan 07, 2008 1:50 pmHey - this is a great idea - in white too for us guys with black chassis.
Posted: Mon Jan 07, 2008 2:25 pmRight here:
http://www.diytube.com/forumpix/diytubelogo.jpg
To invert, just use Irfanview and select Negative. Cheers!
http://www.diytube.com/forumpix/diytubelogo.jpg
To invert, just use Irfanview and select Negative. Cheers!
Posted: Mon Jan 07, 2008 3:49 pmThanks Shannon, this is what I am going to use. Thinking Blue on black enclosure will look good.
This is what I use for the process. It can be tedious but the end result is good. The website makes it look easier than it is.
http://www.pulsarprofx.com/DecalPRO/Ver ... rview.html
One example of what I have done in the past.
This is what I use for the process. It can be tedious but the end result is good. The website makes it look easier than it is.
http://www.pulsarprofx.com/DecalPRO/Ver ... rview.html
One example of what I have done in the past.
Posted: Mon Jan 07, 2008 8:55 pmseparks wrote:Right here:
http://www.diytube.com/forumpix/diytubelogo.jpg
To invert, just use Irfanview and select Negative. Cheers!
Or on an Apple: Control + Option + Apple + 8
and then take a screen shot Apple + Shift + 4 and define the area to create a snapshot of.
Apple + Shift + 3 for the whole screen capture.
Posted: Thu Jan 17, 2008 9:31 amInstalled the decal. Didn't come out perfect but it will do, could have been a little higher. The flash really brings it out, under normal conditions it blends better and the scratch by the switch isn't really noticable.
