this is an old topic but hopefully one of you will come across it
![Wink ;)](./images/smilies/wink.png)
I'm already the happy owner of a GSG amp (which has been running almost every day in my office for 10 years
![BANANA (banana)](./images/smilies/banana.gif)
Just a quick question:
On my tube amps, I usually delay the high voltage (90 seconds) by placing a Standby switch on the rectifier heater .
Apart from cutting the PCB track from terminal block J3 to pin 7 of V2, is there any other way to do this ?
Thanks