get*set*go semi-clone with 6AV5GA

2nd harmonics for the masses

get*set*go semi-clone with 6AV5GA

Postby TomMcNally » Sun Dec 10, 2017 3:29 pm

I built this amp in one afternoon/evening. It's basically a get*set*go circuit without the DC on the heaters, and using 6AV5GA's in the output rather than 6B4G's. Ed Brown made a nice post a few years about a few years ago and I've built quite a few, with great results. http://www.diytube.com/phpBB2/viewtopic.php?f=14&t=4551&p=55823&hilit=6AV5GA#p55823 This amp is the basic get*set*go schematic, but without the DC on the heaters, which isn't needed since this isn't a directly heated Triode. I also used solid state rectifiers for a little more B+. The Cathode circuits are on turret boards, as well as the power supply. Great sounding amp ! I had to clear the snow from my deck to take the pictures this morning !

Image
Image
Image
Image


Many similar looking amps at http://tmamps.com
User avatar
TomMcNally
Darling du Jour
 
Posts: 2724
Joined: Sat Nov 19, 2005 2:19 pm
Location: Northfield, NJ

Re: get*set*go semi-clone with 6AV5GA

Postby vvelt » Wed Dec 13, 2017 9:17 pm

Wow, nice build. I love how you used those little turret boards, very clever.
User avatar
vvelt
 
Posts: 13
Joined: Sat Jun 02, 2012 1:56 pm
Location: New Haven, Connecticut

Re: get*set*go semi-clone with 6AV5GA

Postby Jeffytube » Sun Jan 28, 2018 2:00 pm

Hi Tom,

Wonderful. What a nice inspiration for building these amps. I have a few 12AV5GA here to try out for the my next build. Thanks.
Jeffytube
 
Posts: 6
Joined: Thu Aug 07, 2014 1:58 am
Location: Los Angeles, CA


Return to get*set*go

Who is online

Users browsing this forum: No registered users and 1 guest