Cushman CE-24B (any use for audio?)

arcane secrets and handshakes revealed!

Cushman CE-24B (any use for audio?)

Postby Blair » Sat May 04, 2013 8:19 pm

I got one of these today from another DIYer th Dallas. Is it of any use in audio?
Blair
KT88
 
Posts: 1272
Joined: Thu Nov 09, 2006 10:22 am

Re: Cushman CE-24B (any use for audio?)

Postby battradio » Sat May 04, 2013 10:42 pm

Its for radio use , it a radio frequency volt meter , a scope would be better for you use .
Mark
Image
User avatar
battradio
KT88
 
Posts: 927
Joined: Tue Mar 10, 2009 12:58 am
Location: near ST.Louis MO.

Re: Cushman CE-24B (any use for audio?)

Postby Blair » Sat May 04, 2013 10:52 pm

I've got a nice scope, so this is not necessarily something for me?
Blair
KT88
 
Posts: 1272
Joined: Thu Nov 09, 2006 10:22 am

Re: Cushman CE-24B (any use for audio?)

Postby Geek » Sun May 05, 2013 12:29 am

Are you into radio, particularily LW/MW and low SW DX'ing? If so, frequency selective voltmeters often kick butt on a general coverage receiver (love)
-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
User avatar
Geek
KT88
 
Posts: 3585
Joined: Sun Oct 21, 2007 3:01 am
Location: Chilliwack, British Columbia

Re: Cushman CE-24B (any use for audio?)

Postby Blair » Sun May 05, 2013 7:13 am

Nope. I don't like to talk on the phone. Much less anything HAM related:)

Oh well, lessen learned. Don't drink beer at nerd fest:) you end up with things you do not need.

Blair
Blair
KT88
 
Posts: 1272
Joined: Thu Nov 09, 2006 10:22 am

Re: Cushman CE-24B (any use for audio?)

Postby Geek » Sun May 05, 2013 3:33 pm

Ummm.... "Listening", not talking ;)

I have the same "phone-o-phobia". Welcome to the club! (c)

Cheers!
-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
User avatar
Geek
KT88
 
Posts: 3585
Joined: Sun Oct 21, 2007 3:01 am
Location: Chilliwack, British Columbia

Re: Cushman CE-24B (any use for audio?)

Postby Blair » Mon May 06, 2013 3:31 pm

LOL!! Proof, I should not own this:)
Blair
KT88
 
Posts: 1272
Joined: Thu Nov 09, 2006 10:22 am

Re: Cushman CE-24B (any use for audio?)

Postby EWBrown » Tue May 07, 2013 12:59 pm

You have a PM [:)

Image


The CE24B Frequency Selective Voltmeter measures signal and noise levels in FDM carrier and radio multiplex systems. The frequency range covered is 200Hz to 5.0MHz. Levels may be measured from -120 dBm to +12 dBm. For frequencies to 100kHz, levels up to +50 dBm can be measured using the External Attenuator/Buffer. The CE24B is lightweight and housed in a portable case with protective lid. It can be easily carried into the field for measurements at remote repeater locations. Power for the CE24B is supplied by two rechargeable batteries which will operate the instrument for approximately 10 hours, or by AC input. Input to the CE24B is through coaxial connectors for unbalanced systems. Input impedances of 75, 124, 135, 150, or 600 ohms are selectable, and may be used in either the terminating or bridging mode. The meter reads directly in dBm for each input impedance.

/ed B
Real Radios Glow in the Dark
User avatar
EWBrown
Insulator & Iron Magnate
 
Posts: 6389
Joined: Wed Mar 19, 2003 6:03 am
Location: Now located in Clay County, NC !

Re: Cushman CE-24B (any use for audio?)

Postby Blair » Tue May 07, 2013 1:44 pm

PM replied.

Image

Image

Blair
Blair
KT88
 
Posts: 1272
Joined: Thu Nov 09, 2006 10:22 am


Return to test & measurement

Who is online

Users browsing this forum: No registered users and 12 guests