Page 1 of 1

BOONTON 1120 Service Manual

PostPosted: Sun Jan 10, 2010 3:41 am
by ttc46
Hello,

For 2 years ago, I have acquired a Boonton 1120 Audio Analyzer.
Today I have a little problem with it.
I have the Instruction Manual, but I don't have the Service Manual with the schematic
If everyone have it in PDF format or a hard copy to sell, answer me.

Thank you

And Happy new Year

PostPosted: Sun Jan 10, 2010 5:50 pm
by Geek
Here's an 1130:
http://bama.edebris.com/manuals/boonton/1130/

Will the circuit be similar?

Cheers!

PostPosted: Mon Jan 11, 2010 5:51 am
by ttc46
Hello Geek,

It seems that the circuit of the analyzer are similar.
Thank you for the answer.

Bye

PostPosted: Mon Jan 11, 2010 3:37 pm
by TomMcNally
I posted a copy of the 1120 manual here (for a limited time - grab it now):

http://millenniumradiogroup.com/temp/1120.pdf

PostPosted: Tue Jan 12, 2010 10:08 am
by ttc46
Hello TomMcNally,

Thank you for the copy of the 1120 manual.

Bye

PostPosted: Tue Jan 12, 2010 5:36 pm
by Geek
Tom,

Ye rock, ya scallywag! Image

Cheers!

PostPosted: Mon Jan 18, 2010 5:52 am
by ttc46
Hello,

Did anyone know how much versions of the BOONTON 1120 exits?
I looked at the 1120 manual and I see that the power Supply PCB and the motherboard of my 1120 are not the same as describe in the manual.
Thank for your answer.

Bye

PostPosted: Tue Mar 02, 2010 6:49 am
by Shannon Parks
Just assumed that any revisions were slight. Presumably they are plug and play FRUs, if you just needed to get a new power supply. Did you sort it out?

PostPosted: Mon Mar 08, 2010 12:00 am
by 1audio
I have two very different versions of the 1120. The earlier one does not have the "poweramp" for the output and has less drive. It also doesn't have the board in the back of the unit (the amp). The later 1120 is so similar to the 1121 I have to look carefully for the differences.

The schematic posted is for the earlier version of the 1120. Perhaps someone can make the later version or an 1121 schematic available? I would like it as well, having misplaced my copy of the manual.

PostPosted: Sat Mar 13, 2010 9:19 am
by jackinnj
I have the schematic on my website -- go into
http://www.tech-diy.com/TestEquipment/T ... weramp.gif