Hickok 600A Tube Tester
2 posts
• Page 1 of 1
Hickok 600A Tube Tester
by pureh2o » Wed Jan 28, 2009 3:30 pm
Hi all. I'm new to forum, but old on many others. I am retired now, and able to enjoy my passions. I have a problem. I own a Hickok 600A. The 9 pin socket was not working as well as the 7 pin socket. I replaced the 9 pin socket, and it works fine now. The 7 pin socket was fine so I did'nt replace it. The voltages to the pins are correct, I have checked the caps, and resistors. They all checked out ok. I cannot figure out why no output to the meter is occuring. Any suggestions? Thanks all for any help. John. Yellow_Light_Colorz_PDT_13
- pureh2o
- Posts: 1
- Joined: Wed Jan 28, 2009 2:47 pm
Hickok 600
by msmpe » Wed Jul 29, 2009 5:40 pm
If you still have the problem, you can get a schematic at BAMA (bam.sbc.edu ?).
8>) Mike
If there's no sound in a vacuum, where'd the music come from?
If there's no sound in a vacuum, where'd the music come from?
- msmpe
- KT88
- Posts: 305
- Joined: Wed Mar 26, 2008 12:31 pm
- Location: central california coast
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 13 guests