by pureh2o » Wed Jan 28, 2009 3:30 pm
Hi all. I'm new to forum, but old on many others. I am retired now, and able to enjoy my passions. I have a problem. I own a Hickok 600A. The 9 pin socket was not working as well as the 7 pin socket. I replaced the 9 pin socket, and it works fine now. The 7 pin socket was fine so I did'nt replace it. The voltages to the pins are correct, I have checked the caps, and resistors. They all checked out ok. I cannot figure out why no output to the meter is occuring. Any suggestions? Thanks all for any help. John. Yellow_Light_Colorz_PDT_13