Little 6AW8 Regulator

arcane secrets and handshakes revealed!

Little 6AW8 Regulator

Postby Geek » Sat Sep 30, 2017 12:03 pm

Hi Folks,

Got a pair of McIntosh C8's for repair sans-PSU. So did a "junkbox" PSU for them and a GP bench reg on scrap chassis.

The design is one I've used on linestages, so I knew it worked good long-term, only I cheated using zener diodes instead of a 5651 of the original design and adjusted the divider accordingly.

Takes just six minutes for it to stabilize (3.5V positive drift). Vreg could be better, but I decided the decoupler was quite neccessary, since I already shorted the output :o)

Cheers!
Attachments
Voltage.jpg
Voltage.jpg (109.28 KiB) Viewed 102 times
Low_Current_Reg.png
Low_Current_Reg.png (14.04 KiB) Viewed 102 times
-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
User avatar
Geek
KT88
 
Posts: 3563
Joined: Sun Oct 21, 2007 3:01 am
Location: Chilliwack, British Columbia

Return to test & measurement

Who is online

Users browsing this forum: No registered users and 1 guest

cron