Any Mark IV moders out there? Just interested to hear your experiences with the Poseidon upgrade or any other upgrade.
Greg
Mark IV mods
4 posts
• Page 1 of 1
Mark IV mods
by graftdesign » Fri Apr 16, 2010 4:22 pm
- graftdesign
- Posts: 5
- Joined: Thu Apr 15, 2010 8:26 am
- Location: Birmingham, Michigan
by graftdesign » Thu Apr 29, 2010 12:45 pm
I guess my biggest curiosity is gauging the popularity of the Poseidon boards.
Some key parts are no longer available from Mouser (according to the BOM). I am concluding it's one of the best - if not the best - upgrades available, but getting parts is a problem for a complete board and at least for me is an obstacle. Seems I'm a few years too late as there was much more activity!
Greg
Some key parts are no longer available from Mouser (according to the BOM). I am concluding it's one of the best - if not the best - upgrades available, but getting parts is a problem for a complete board and at least for me is an obstacle. Seems I'm a few years too late as there was much more activity!
Greg
- graftdesign
- Posts: 5
- Joined: Thu Apr 15, 2010 8:26 am
- Location: Birmingham, Michigan
by mesherm » Thu Apr 29, 2010 4:25 pm
Are you perhaps talking about The LM 234Z device? Mouse has been out of stock for a while now. They can still be had though at Allied.
http://www.alliedelec.com/search/productdetail.aspx?SKU=2880388
Some of us here (including me) stocked up on extras in case of a shortage.
I have a few LM234Z and lots of LM334Z I could mail to you.
http://www.alliedelec.com/search/productdetail.aspx?SKU=2880388
Some of us here (including me) stocked up on extras in case of a shortage.
I have a few LM234Z and lots of LM334Z I could mail to you.
Mike's N-1 Rule: When looking for N number of components to finish a job, you have a 95% chance of only finding N-1 of them.
-
mesherm - KT88
- Posts: 1232
- Joined: Fri Aug 27, 2004 10:33 pm
- Location: Alvin Texas
LM334Z
by Shannon Parks » Fri Apr 30, 2010 6:08 am
I wonder if I should by a box of the LM334Z from Digikey. They have them for 90 cents in single piece qtys - maybe I'll by 250 or 500. I see that they have 5,000+ and that they are RoHS, so I'm not worried about them disappearing just yet.
Shannon
Shannon
-
Shannon Parks - Site Admin
- Posts: 3764
- Joined: Tue Mar 18, 2003 5:40 pm
- Location: Poulsbo, Washington
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 4 guests