250V film bypass caps for power supply

for Dynaco Mark II/III/IV and DIY PP monoblocks

250V film bypass caps for power supply

Postby highflyin9 » Tue Feb 28, 2017 8:16 pm

I'm in the process of building a pair of MKIVs and I'm using Classic Valve's cap boards. I know the electrolytic power caps in the Dynaco need to be rated 525 to 550V for surge events (normally need to handle 420-430V), so the Classic Valve boards use a safe 350V parallel. My question is I have a number of 250V Panasonic film caps I could use for bypassing the 350V electrolytics underneath the board, there's clearance available. I know film caps can handle surges much more adequately than electrolytic. I'm assuming the 250V units would be fine here, but wanted to double check to see if anyone had any thoughts. TIA
My DIY Electronics Blog: DIYAudioBlog.com
User avatar
highflyin9
 
Posts: 111
Joined: Tue Jul 27, 2010 7:42 pm
Location: East Coast

Re: 250V film bypass caps for power supply

Postby Geek » Tue Feb 28, 2017 8:27 pm

They won't lose antimatter containment like a 'lytic, but they can scorch pretty good (lol)

Cheers!
-= Gregg =-
Fine wine comes in glass bottles, not plastic sacks. Therefore the finer electrons are also found in glass bottles.
User avatar
Geek
KT88
 
Posts: 3535
Joined: Sun Oct 21, 2007 3:01 am
Location: Chilliwack, British Columbia


Return to poseidon

Who is online

Users browsing this forum: No registered users and 1 guest