Ok first let me say I am king procrastinator for waiting this long to get amp finished
I really want to get this done and start enjoting it so here goes
I had some problems before and everyone was a big help in getting me this far
I had a bad power tranny I am using Neds for this
Then got that worked out
now
when I hook up the amp and turn it on it has very low speaker output , sounds good though
Here are some pics
http://s194.photobucket.com/albums/z54/ ... 20Rev%20B/
I know a few have helped me with this before
What do you think I should start with?
I had a bad power tranny but did not check my out put trannys do you think they could be suspect?
here are my measurements
J1
1. 1M
2. none
3. 1M
J2.
1. none
2. none
3.1M
J3
1.none
2.none
3.1 ohm (when connected)
J4.
1. none
2.none
3. 1ohm (when connected )
J5
1. none
2. none
3. 1M
J6
not fully tested yet
V1
1. 148.5
2
3 1.9
4 3.3
5 3.3
6 147
7
8 1.86
9 3.3
V2.
1. 172
2. 148.5
3. 147.8
4. 3.3
5. 3.3
6. 172
7. 147
8. 146
9. 3.3
V3. V4 V5 and V6 all tested like this
1.
2.
3. 12.4
4. 3.3
5. 3.3
6.
7. 335
8.
9. 340
Thanks again for all your help
I stopped on this from being a bit frustrated some hopefully I can tacle this problem now I know it will be rewarding when I do