Talked to Brian at Edcor and he went ahead and put these on the website for anyone that's interested.
http://edcorusa.com/products/799-cxpp25-ms-8k-23.aspx
Ty_Bower wrote:That could be an attractive option for any future ST35 builders out there. Two of those outputs plus the XPWR005 will cost you $156.25 plus shipping. That's a good $57 cheaper than if you bought a full set of Z565/PA774 clone iron.
Geek wrote:I've never been disappointed with an Edcor product. Unlike Hammond, Edcor's model perfectly in PSUD
Cheers!
gazzgary wrote:I have just emailed Edcor to see if it is possible to add an extra 120v winding to the primary of the XPWR005 so that it can be operated on 120v or 240v for those of us that have 240 mains.
Gareth
EWBrown wrote:Just don't ask Brian about adding electrostatic shielding between the primary and secondary windings....
Users browsing this forum: No registered users and 45 guests