Ty:
Your right, I did pay good money, so, it should fit. I will shoot them an e-mail and let me know that the caps are a bit to tall to build the project properly. Also, thanks for the HU on the Adcom. I will probably do some more research on kits / schematics and build something to suit.
Shannon:
It's a Rev. D board. I bought the complete kit from Triode, so, I did not buy my parts at Mouser. I will try to measure / figure out what caps I have installed.
DeathRex and Terry:
Thanks for the info on the various caps. I will need to do a bit of measuring on the board and looking around on the Mouser website for a shorter cap.
This will probably be my best solution at this point.
Ed:
Thanks for HU on the bowed chassis, I will get a straight edge on it and have a look-see. Although, I don't think it is bowed. I do like you six stick on feet idea.
I have an idea or two that I will explore when I get home tonight (damn job gets in the way of everything...)
And if I replace the caps, I will then have started collecting parts for my next build!
Thanks again everybody for the help and suggestions!
Scott