by EWBrown » Thu May 08, 2008 5:14 am
The resistor value isn't critical, anything from 100 0hms to 1K will work. use at least 1 watt, or 2 watt resistors, especially for the 1K value.
The resistor can connect on the terminal boards from "plate" to "UL" and just tape off, or otherwise insulate the unused UL taps from the output transformers.
There has been discussion of adding a diode in series with the resistor (anote towards B+, cathode towards G2). Apparently this improves the pseudo-triode operation.
/ed B in transition between states
Last edited by
EWBrown on Tue Sep 02, 2008 4:47 pm, edited 1 time in total.
Real Radios Glow in the Dark